Gutter Guard Perth

Gum leaves, gum nuts and sand fill Perth gutters fast. Gutter guard (a mesh fitted over your gutters) keeps most of it out, so gutters overflow less and need cleaning far less often. Installed, it usually costs about $37 to $94 per metre, or around $2,000 to $4,500 for a typical single-storey home.

Call (08) 5550 0123

Supply & install

Metal mesh options

Bushfire-area advice

Written quotes

Gutter Guard Prices in Perth (2026)

Gutter guard type

Typical installed price

Polymer (plastic) mesh

$25–$40 per metre

Aluminium mesh

$35–$55 per metre

Stainless steel mesh (often used in bushfire areas)

$45–$70 per metre

Solid hood covers

$40–$80 per metre

Removing old or failed guards

$10–$25 per metre

Typical single-storey home (60–80 m of gutter)

$2,000–$4,500

Another independent Perth guide puts gutter guard at $37 to $94 per metre (typical about $58). Two-storey homes cost more because of height-safety setup.

Estimated Perth metro costs, November 2026, from independent cost guides (see our Resources). Indicative only, not a quote. WA Consumer Protection advises getting at least three written quotes and checking that GST is included.

Are Gutter Guards Worth It in Perth?

Usually yes if:

  • Gum trees or big trees overhang your roof. Leaves and gum nuts are exactly what mesh keeps out.
  • You’re in a bushfire-prone area. Fewer dry leaves in gutters means less fuel for embers.
  • Your roof is hard or unsafe to get onto, such as a two-storey home or a steep pitch.
  • You clean gutters more than once a year now.

Probably not worth it if:

  • Your home has few trees nearby and gutters stay fairly clear.
  • Your gutters are rusted or sagging. Fix or replace those first, because guarding a failing gutter wastes money. See gutter replacement.

Do Gutter Guards Stop You Needing Gutter Cleaning?

No, but they cut it right down. One independent guide estimates cleaning drops from about twice a year on unguarded gutters to every two to three years with well-fitted mesh, or about every two years on heavily wooded blocks. Fine dust and small particles still get through, and leaves can sit on top of the mesh, so guards still need an occasional check and brush-off.

We recommend a full gutter clean before any guard goes on, so you’re not sealing in old debris. See gutter cleaning.

Gutter Guard in Bushfire-Prone Areas

In the Perth hills, around Kalamunda, Mundaring, Roleystone, Darlington and Gidgegannup, gutter guard is part of bushfire preparation. Under the Australian bushfire building standard AS 3959, if gutter guards are installed, they must be non-combustible, so plastic mesh is out. Metal mesh (aluminium or steel) is used instead. The exact product needed depends on your property’s Bushfire Attack Level (BAL).

  • Check whether your property is in a designated bushfire-prone area with DFES.
  • If it is, ask for a guard that’s certified for your BAL rating, and keep the paperwork.
  • AS 3959 applies to new homes and certain building work. For an existing home, a non-combustible guard is still the sensible choice.

This is general information, not a bushfire assessment. For a BAL rating, use an accredited bushfire consultant.

Which Gutter Guard Is Best for Gum Trees?

  • Mesh hole size matters: gum leaves are narrow, so choose a small aperture that stops leaves and gum nuts but still lets rain through quickly.
  • Metal outlasts plastic in Perth’s sun, and it’s the only option in bushfire areas.
  • Match the roof profile: tile roofs and Colorbond (corrugated or trimdek) need different fixing saddles and trims to seal properly.
  • Box gutters need their own guard design.

Our Gutter Guard Installation Process

  • Inspect the gutters, roof edge and fascia. Repairs are quoted first.
  • Clean the gutters and flush the downpipes.
  • Fit the mesh to suit your roof profile, with saddles and trims.
  • Check that water flows freely and the mesh is secure.
  • Photos of the finished job, plus a written quote and warranty details.

DIY or Professional Install?

DIY kits from hardware stores are cheaper up front, and reasonable for a low, single-storey home with an easy roof. A professional install is better for two-storey homes, steep or tiled roofs, bushfire-prone properties (where the product and fixing matter), and gutters that need repairs first. Whatever you choose, never stand on brittle old tiles or asbestos-cement roofing.

Gutter Guard FAQs

Common questions about gutter guards in Perth.

Call (08) 5550 0123

Get a Free Quote

More detail: gutter cleaning · gutters & downpipes · gutter replacement cost · Midland & hills

About $37 to $94 per metre installed, depending on the mesh. A typical single-storey home (60–80 m of gutter) costs about $2,000 to $4,500. Two-storey homes cost more.

Yes, if trees overhang your roof, you’re in a bushfire-prone area, or your roof is hard to get onto. They’re less worthwhile on homes with few trees nearby.

Not completely. They cut cleaning to roughly every two to three years, but guards still need an occasional check and brush-off.

Under AS 3959, gutter guards (if installed) must be non-combustible, so plastic mesh isn’t suitable. The right product depends on your BAL rating.

Only if they’re sound. Rusted, leaking or sagging gutters should be repaired or replaced first.

Get a Written Gutter Guard Quote

Call (08) 5550 0123 or send us a photo of your roof and gutters.

Fill out the form and we’ll call you back.

Roof repairs, restorations and roof plumbing across Perth, from Yanchep to Mandurah and the Hills.

Call (08) 5550 0123
Email info@fixmyroofperth.com.au

Services

Areas We Serve

All of Perth, north and south of the river

  • Joondalup
  • Wanneroo
  • Scarborough
  • Fremantle
  • Midland
  • Kalamunda
  • Canning Vale
  • Armadale
  • Rockingham
  • Mandurah
Get a Free Quote

Copyright © 2026 Fix My Roof Perth. Fix My Roof Perth connects Perth homeowners with a licensed, insured local roofer.

Fix My Roof Perth is a referral service. We connect Perth homeowners with independent, licensed local roofing contractors, who are responsible for the work they carry out, including their licensing, insurance and workmanship warranty. Always check a contractor’s licence before work begins.

Call Now — Free Quote